The following chart is a general guide to assist you in finding the right operator for your gate.
Please keep in mind that the material and structure of each gate, the location and climate where the gate is installed, create a unique situation particular to each gate operator application.
| Gate Type | Weight and length (per leaf) | Frequency of use | Gate Operator | Power Requirements |
|---|
| My Gate is a SWING Gate that does not exceed: | 350 lbs and 12 ft. | PRO lightweight | PRO SW-1500 | DC Solar Compatible |
|---|
| 500 lbs and 16 ft. | PRO moderate | PRO SW-2500 | DC / Solar Compatible | | 650 lbs and 16 ft | moderate usage | PRO SW-3000 | DC / Solar Compatible | | 1000 lbs and 20 ft | moderate to heavy | PRO SW-4000 | DC / Solar Compatible | | My Gate is a SLIDE Gate that does not exceed: | 500 lbs and 30 ft | light to moderate | PRO SL-1000 | DC / Solar Compatible |
|---|
| 1000 lbs and 30 ft | moderate to heavy | PRO SL-2000 | DC / Solar Compatible |
|
Where can I purchase a GTO/PROŽ Automatic Gate Operator? GTO/PROŽ is the best buy in its class. Keep in mind, every gate application is unique to that gate and usage. The price of the gate opener system will vary depending upon the number of accessories and the type/model of gate opener you need. Our dealers and retailers can give you pricing on the gate opener system that is best for you. We do not sell factory direct, therefore we do not quote pricing. However, we are happy to refer you to your nearest dealer or retailer for pricing information on our affordable gate opener systems. You may purchase accessories only from an authorized GTO/PROŽ dealer.
Do GTO/PROŽ gate operators have soft start and soft start features? Yes, the PRO SW-3000 and PRO SW-4000 gate operator series, have this advanced feature. This will prolong the life of gate hardware and gate operators. How does the gate close? GTO/PROŽ Automatic Gate Operators are fully capable of adjustable programming to allow for the gate to close automatically after reaching its fully opened position. If you wish to have the gate close sooner than that temporarily, push the button on the GTO/PROŽ entry transmitter to activate the gate. What happens if the gate hits something while it is in motion? The GTO/PROŽ Automatic Gate Operators have a built-in safety obstruction sensor that once activated, causes the gate to stop and reverse its direction (much like a garage door opener). The sensitivity for this safety feature is fully adjustable. What if I DON'T want my GTO/PROŽ automatic gate operator to close automatically? To disable this feature, open the control box and turn the dial until the 'auto close' is off.
Will GTO's automatic gate operator hold the gate tightly closed? Depending on the length and type of gate, there is a possibility that the end of the gate can flex enough to allow a person or an animal to enter. For maximum stability and additional security, the GTO/PROŽ Automatic Gate Lock should be installed. Can I lock my gate? Yes. GTO/PROŽ's Automatic Gate Lock will lock the gate and has a manual key as well . Do you carry an automatic lock that is for pedestrians only? Yes. GTO/PROŽ has a product that will do just that. It is called the Bulldog Pedestrian Gate Lock. It does not require a gate operator to lock a "walk-thru" gate. It can utilize additional accessories such as digital keypads for added security. It is wonderful for areas around pools or daycare centers that need to restrict pedestrian traffic. Can I manually open the gate after I have installed my GTO/PROŽ automatic gate operator? Yes. All low voltage systems such as the PRO SW-3000 and PRO SW-4000 series gate operators, in which the opener arm is mounted with clevis pins. By removing the pin and clip at either end, the operator can be removed and the gate manually opened. Can anyone remove my GTO/PROŽ automatic gate operator by removing the clevis pins? Yes. However, to avoid theft, add the Pin Lock accessory on the front end of the swing gate operator to ensure that only the homeowner can unlock and release the opener.
Can I open my garage door opener with my GTO/PROŽ entry transmitter? Garage door openers use a different radio frequency than the GTO/PROŽ Automatic Gate Opener does. If you want your GTO/PROŽ entry transmitter to activate both, you can purchase a special GTO/PROŽ garage door receiver (special order) The GTO garage door receiver has the same frequency as the GTO/PROŽ Automatic Gate Operator. If your gate and garage are within close range of each other and you wish to have one transmitter to do it all, then you can purchase a two or three button GTO entry transmitter (special order) that will operate the openers separately. Can I open my GTO/PROŽ automatic gate operator from my house with my GTO/PROŽ transmitter? The normal operating range of the GTO/PROŽ entry transmitter is 50 ft. to 100 ft. However, because it uses a radio frequency and is subject to interference by weather conditions, topography, outside interference, etc., the actual range may vary. If your house is within 1000 ft. of your gate, you can place a second set of low voltage wires in the ground at the same time you are running wire for the transformer and connect it to an unlit Push Button inside the house. At the control box simply connect the wires to the accessory terminal block. Can anyone with a GTO/PROŽ transmitter be able to open my gate? Not if you personalize your transmitter code. Every GTO/PROŽ entry transmitter comes with identical factory settings, but you can personalize your code by repositioning the dip switches inside the GTO/PROŽ entry transmitter. Can anyone open my GTO/PROŽ gate operator without my GTO entry transmitter? GTO/PROŽ offers a weatherproof Digital Keypad accessory (for wired or wireless applications) which can be mounted on a post near the gate. The keypad can be programmed with up to 15 different entry codes for use by family members, delivery personnel, employees, etc. An additional security feature is the ability to change only one code at a time. For example, you can give a delivery person an entry code and then that particular code can be changed or eliminated after the delivery, without affecting the other codes.
GTO/PROŽ's Automatic Gate Openers are currently in use from the Arctic to the Amazon. Because of the battery's design, extreme cold may cause it to operate a little slower than under normal conditions, and may cause it to malfunction. Therefore, we recommend an optional heater in extreme cold. Does lightning affect the GTO/PROŽ automatic gate opener? No electrical device can withstand a direct lightning hit. However, GTO/PROŽ Automatic Gate Operators have built-in ground paths on the control board designed to diffuse mild static charges created by lightning.
Just how are GTO/PROŽ's automatic gate operators powered? All low voltage (DC) GTO/PROŽ automatic gate operators are operated by a 12 volt, 7.0 amp-hour battery which also provides battery backup during a power outage. How many times will the GTO/PROŽ automatic gate operator activate during a power outage? On the average, a fully charged 12 volt, 7.0 amp-hour battery will provide fifty (50) cycles during a power outage. The number of cycles may vary depending on factors such as the type and size of gate, number of added accessories, and weather conditions. Can you install more than one battery into the control box? Yes, the PRO SW-3000 and PRO SW-4000 have larger control boxes and are prewired for the optional second battery. This is especially important for solar applications for increased backup power supply. Just how are GTO/PROŽ's batteries charged? Each of GTO/PROŽ's (DC powered) Automatic Gate Openers comes with a transformer that plugs into any 110/120 electrical outlet and provides a trickle charge to the battery. The transformer is connected to the control box with up to 1000 ft. of GTO's 16 gauge, multi-stranded, dual conductor, direct burial, low voltage wire (not provided). If there is not a standard outlet within 1000 ft. of the control box, the battery charge can be maintained with optional solar panel(s). If an outlet is located outside, the transformer can be placed inside a weatherproof electrical box and connected to the control box with GTO low voltage wire. | 
