GTO

Product Code: PRO-SW1500

GTO/PRO Swing Gate Operator


PRO-SW1500 for Single Gates
Add another operator for dual gates
(requires optional connection kit R4076)

Low Voltage Swing Gate Operator designed specifically for rural farm and ranch style applications. The PRO-SW1500 is designed for lighter weight gates. Unlike most GTO operators, the PRO-SW1500 uses a 12V automobile or marine battery (not supplied). It also has no control box, the control board is mounted in the operator housing. This versatile GTO/PRO gate operator is ideal for light tubular steel, vinyl, wood, or chain link gates. Can be powered by either a low voltage transformer or solar charger.

  • 12 volt system, no electrician needed for installation
  • Gate will work during electrical power outage
  • Quick and easy installation, with user friendly instructions
  • Solar Panel Charger available for remote locations
  • Will operate a gate up to 12' long and weighing up to 350 lbs. each leaf
  • Can operate 175 or more gate cycles per day using transformer charger, depending on gate size and weight (see cycle chart link below)
  • Control board built into the operator housing (replaceable)
  • Receiver unit with antenna and 10' cable can be placed in best location for reception of signal
  • Can be operated by remote transmitter, digital keypad, push button or combination
  • Full systems capable "add on ready" heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0-120 seconds).
  • Full access ready package includes, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a standard installation. Standard automotive or marine battery housed in a standard battery box is required (not included)
  • Can operate as 'push to open' or 'pull to open' (specify when ordering - extra hardware required for push to open)
  • UL rated for Class I, II, III. System certified to be in compliance with UL 325, 5th edition.
  • 12 month limited warranty applies to replacing parts from GTO, Inc.
  • 30 day satisfaction guarantee from Hoover Fence

Technical Specifications:

Drive
  • Powered by reliable 12 volt DC motor, totally enclosed gear drive system.
  • Temperature rating of motor: -5º F (-28º C) to +160ºF (+71ºC)
  • Opening time is 18-24 seconds.
  • Range of arm stroke is up to 19" (48 cm), with arm fully retracted is 37.25" (95 cm), mounting point to mounting point.f
 
Power
  • The PRO-SW1500 system is powered by a 12V automobile or marine battery (not supplied). A weatherproof battery box is required, can be found in most hardware, automotive, marine, or home centers.
  • Battery charge maintained by a 120V AC/60 Htz input and 18VAC at 40VA. output, transformer rectified to 14VDC through the control board. NOTE: Transformer should never be connected directly to any battery.
  • Optional GTO Solar Panel Charger: float voltage 14.5 V DC output from a 19-3/8" (49.21 cm) x 15-1/4" (38.74 cm) silicon alloy panel. Generates minimum of 10 watts at 600 mA. A gated diode on the control board prevents battery discharge.
 
Controls
  • The GTO control board can be programmed for pull-to-open or push-to-open.
  • Adjustable auto close, obstruction sensitivity and dual gate sequencing.
  • Auto-memorization of digital transmitter code.
  • Charging regulated circuit on control board. "Sleep draw" is 40 mA; "active draw" is 2 to 5 amps.
  • GTO remote-mounted RF receiver tuned at 318 MHz.

Includes:

  • Operator arm
  • AC transformer
  • Control board (enclosed in weatherproof operator housing)
  • Receiver with 10 ft. cable
  • Entry transmitter
  • 10' battery wire harness
  • Mounting hardware
  • Installation/safety manual
  • Caution signs.
  • Warning Beeper
  • Adjustable obstacle-reversing safety feature