Applications: - AC or DC Powered Gate Operators/ Actuators
- Slide, Roll, and Swing Gates
- Restricted Access Pedestrian Doors
- Lights
- Parking Lots
- Warehouses
- Garage and Overhead Doors
- Commercial & Residential Applications
- Office Buildings
- Hospitals
Features: - Proudly manufactured in the USA
- Wired and wireless models available
- Suitable for indoor/ outdoor applications
- Rugged, injection-molded lexan faceplate & housing
- Zinc-coated hardware
- Flexible mounting to walls or gooseneck stands
- 12 user-programmable options
- 1,000 user-programmable codes
- Code range - '0001-9991'
- Programmable flash code
- Programmable flash code (wired 950 model only) - holds gate open/ closed
- Positive/ negative feedback - LED indicators w/ on/off dipswith
- Audible beep indicator with on/off dipswitch
- Keypad activated downlight stays lit for 10 seconds with on/ off dipswitch
- 3-Strikes-You're Out - timed three minute feature with on/ off dipswitch
- Operates in either AC/DC applications
- Ultra-low 20uA current draw (half the typical)
- Non-volatile memory for code retention
- Secure locked enclosure with key
Model 950/ 951 Keypad Programming Manual | Mechanical Specifications: - 7.5" High x 4.75" Wide x 4.5" Deep
- 190.50 mm High x 120.65 mm Wide x 114.30 mm Deep
- UV-Resistant Lexan 403R Housing/ Faceplate
- Indoor/ Outdoor Suitable
- Wall/ Gooseneck Mountable
- Zinc Coated Hardware
- Ship Weight 3 Lbs.
Electrical/ Environmental Specifications: - 7-24 VAC or VDC
- 20uA Current Draw
- Operating Temperatures: -40°C to 85°C (-40°F to 185°F)
- Storage Temperatures -55° C to 125°C (-67°F to 257°F)
Relay Information: - .5-60 Second Adjustable Output Time
- Normally Open or Normally Closed Output
Contact Rating: - Max. Switching Power - 30W (resistive)/ 62.5VA (resistive)
- Max. Switching Voltage - 220VDC/ 250VAC
- Max. switching Current - 1 Amp
- Max. Continuous Current - 2 Amp
Programming Modes: - Add Access Codes
- Erase Access Codes
- Add Flash Code
- Erase All Codes
- Add Latch Code
- Set Relay 'On' Time
- Change Master Code
- Reset Master Code
|